Tag Archives: china steel conveyor chains

China OEM Stainless Steel Conveyor Chains Mine Machinery Grain Machines Long Pitch Flat Top Table Car Parking Drag Sharp Paver Forging Scraper Trencher Conveyor Chains

Product Description

Stainless Steel Conveyor Chains Mine Machinery Grain Machines Long Pitch Flat Top Table Car Parking Drag Sharp Paver Forging Scraper Trencher Conveyor Chains

 

Usage: Transmission Chain, Drag Chain, Conveyor Chain, Dedicated Special Chain
Material: Stainless steel
Surface Treatment: Oil Blooming
Feature: Oil Resistant
Chain Size: 1/2"*3/32"
Structure: Roller Chain
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

welded chain

Are there any guidelines for disposing of old or damaged sharp top chains in an environmentally responsible manner?

Yes, there are guidelines to ensure the environmentally responsible disposal of old or damaged sharp top chains. Proper disposal helps prevent environmental pollution and promotes sustainable waste management. Here are some guidelines to follow:

1. Recycling:

Whenever possible, consider recycling the old sharp top chains. Many recycling centers or scrap metal facilities accept metal chains for recycling. Recycling reduces the environmental impact of waste and conserves valuable resources.

2. Local Regulations:

Check your local regulations and guidelines for waste disposal. Different regions may have specific requirements for the disposal of industrial waste, including old chains. Adhere to these regulations to avoid penalties and contribute to responsible waste management.

3. Contact Manufacturers:

Reach out to the manufacturer or supplier of the sharp top chains. They may offer recycling or disposal programs for their products. Manufacturers often have specific procedures for handling their products at the end of their life cycle.

4. Segregation:

If you are disposing of multiple types of chains, including sharp top chains, segregate them to ensure proper recycling or disposal. Mixing different types of chains can complicate the recycling process.

5. Reuse or Repurpose:

If the sharp top chains are still in usable condition, consider reusing them in other applications within your facility or repurposing them for other projects. Extending the life of the chains reduces the demand for new resources.

6. Consult Waste Management Professionals:

If you are unsure about the best disposal practices, consult waste management professionals or environmental experts. They can provide guidance on proper disposal methods that align with environmental regulations.

7. Prevent Contamination:

Prior to disposal, remove any contaminants or hazardous substances from the chains to prevent environmental contamination.

8. Document Disposal:

Maintain proper documentation of the disposal process, including any recycling or waste management receipts. This documentation may be required for compliance purposes.

By following these guidelines, businesses can dispose of old or damaged sharp top chains in an environmentally responsible manner, contributing to sustainability and responsible waste management practices.

welded chain

Are there any innovative technologies or advancements in sharp top chains that improve their efficiency?

Yes, there have been several innovative technologies and advancements in sharp top chains that aim to improve their efficiency and performance in material handling applications. Manufacturers are continuously researching and developing new solutions to meet the evolving needs of industries. Here are some of the notable advancements in sharp top chains:

  • Advanced Materials:
  • One significant advancement is the use of advanced materials, such as high-strength alloys, composite materials, and specialty coatings. These materials offer enhanced wear resistance, improved fatigue strength, and increased corrosion resistance, contributing to longer chain life and improved efficiency.

  • Precision Manufacturing:
  • Manufacturers are leveraging precision manufacturing techniques to create sharp top chains with tighter tolerances and consistent dimensions. This ensures smoother and more precise operation, reducing vibration and noise while increasing overall efficiency.

  • Improved Cleat Designs:
  • The design of sharp top chain cleats has seen advancements to optimize material engagement and minimize product spillage or slippage during conveying. Cleats with specialized shapes and profiles offer better grip, reducing the risk of material loss and enhancing conveyor efficiency.

  • Lubrication Technology:
  • Advancements in lubrication technology have led to the development of specialized lubricants and coatings for sharp top chains. These lubricants reduce friction and wear, improving the chain’s efficiency and extending its service life.

  • High-Temperature Performance:
  • Manufacturers have focused on creating sharp top chains with improved performance in high-temperature environments. Heat-resistant materials and specialized heat treatment processes allow these chains to maintain their strength and integrity at elevated temperatures.

  • Computer-Aided Design (CAD) and Simulation:
  • CAD software and simulation tools have revolutionized the design and testing of sharp top chains. Engineers can analyze various chain configurations and operating conditions virtually, optimizing the chain’s design for maximum efficiency before physical prototyping.

These advancements in sharp top chain technology have resulted in improved efficiency, higher reliability, and reduced maintenance requirements. Manufacturers continue to explore new materials, coatings, and design concepts to meet the increasing demands of modern material handling applications.

welded chain

Are there any safety guidelines to follow when working with sharp top chains to prevent accidents or injuries?

Yes, working with sharp top chains requires adherence to specific safety guidelines to prevent accidents or injuries. Here are some essential safety measures to follow:

  • Personal Protective Equipment (PPE): Wear appropriate PPE, including safety goggles, gloves, and protective clothing, to protect against potential contact with sharp edges and debris during maintenance or handling of the chain.
  • Training and Familiarity: Ensure that personnel handling sharp top chains are adequately trained in their safe operation, maintenance, and handling. Familiarity with the machinery and chain components is essential to prevent accidents.
  • Lockout/Tagout Procedures: Before performing any maintenance or repair tasks, follow lockout/tagout procedures to isolate the power source and prevent accidental startup of the machinery.
  • Proper Handling: Always handle sharp top chains with care. Avoid rough or sudden movements that could lead to accidental injuries or damage to the chain.
  • Regular Inspections: Schedule regular inspections to identify any wear, damage, or misalignment of the sharp top chain. Address any issues promptly to avoid potential hazards during operation.
  • Lubrication Safety: When applying lubrication to the chain, ensure that the machinery is turned off to prevent accidental movement. Use caution to avoid spillage or contact with hot components.
  • Working Load Limits: Always adhere to the working load limits specified by the manufacturer for the sharp top chain and ensure that the chain is not overloaded, which could lead to failure or accidents.
  • Environmental Considerations: Consider the operating environment of the sharp top chain and choose a suitable chain material or coating to withstand the conditions. Corrosive or abrasive environments may require additional safety precautions.
  • Replace Worn-out Components: Replace any worn-out or damaged chain links, sprockets, or other components with compatible and correctly installed replacements to maintain safe operation.
  • Emergency Procedures: Establish and communicate emergency procedures in case of accidents or unexpected events involving the sharp top chain. Ensure that all personnel know how to respond to such situations.

By following these safety guidelines, you can minimize the risk of accidents and injuries while working with sharp top chains, ensuring a safe and efficient material handling environment in your facility.

China OEM Stainless Steel Conveyor Chains Mine Machinery Grain Machines Long Pitch Flat Top Table Car Parking Drag Sharp Paver Forging Scraper Trencher Conveyor Chains  China OEM Stainless Steel Conveyor Chains Mine Machinery Grain Machines Long Pitch Flat Top Table Car Parking Drag Sharp Paver Forging Scraper Trencher Conveyor Chains
editor by CX 2023-09-01

China OEM Alloy Steel Conveyor Chain High Strength Agricultural Machinery Baling Machine Chains sintered bush chain

Product Description

Company Profile

-HangZhou CHOHO Industrial Co., Ltd. was founded in 1999. Has become the leader of chain system technology, the first batch of natioal recognized enterprise technology center,national technology innovation demonstration enterprise,and the first A-share listed company in China’s chain drive industry.The securities code is 003033.
-CHOHO has 4 subsidiaries, including testing technology and international trading companies. has 4 factories in HangZhou, Thailand factory, ZheJiang R&D Center and Tokyo R&D Center. In addition, CHOHO ZHangZhoug Industrial zone is expected to be completed & put into operation next year.
-We specialized in producing all kinds of standard chains and special chains, such as Agricultural Chain, Sprocket, Chain Harrow, Tillage Parts,Rice Harvester Chain, GS38 Chain, Roller Chain, Automobile Chain, Motorcycle Chain Industrial Chain and so on.Our  partners among world top enterprises, such as LOVOL,JOHN DEERE,NEWHOLLAND, CLASS,AGCO,DEUTZFAHR,HONDA, KUBOTA etc.

Production Capacity Equipment

By 2571,CHOHO has more than 2,700 sets of main production equipment and more than 600 sets of high-precision equipment,With the domestic advanced product laboratory and chain production assembly line, CHOHO has strong research and development and testing capabilities for high-end chain products.

Our Advantages

1. Any inquiry you make will be answered professionally within 6~8 hours.
2. Attaches great importance to product quality and approved by many global quality system certification,such as France, Norway, Germany.
3. Focused on Chain since 1999, have rich experience in Production.
4. High-quality workers,First-class advanced equipment,good quality control,advanced technology.
5. Be Good at Custom-Made Products, provide customized services for customers.
6. Participated in the drafting of 24 national and industrial standards such as chains.As of 2571-Mar, CHOHO has 180 authorized patents.
7. With the responsibility of “Providing high quality chain system with the same service life for the global locomotive industry”, have established a strong R&D team.

CHOHO has a natural brand awareness.  As of January 2571, CHOHO has registered the “CHOHO” trademark in more than 60 countries, including the United States, Japan, the United Kingdom, France, Germany, Russia, Spain, Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Greece , Hungary, Ireland, Italy, Netherlands, Poland, Portugal, Romania, Ukraine, Sweden, Australia, Algeria, Egypt, Kenya, Morocco, South Korea, Kazakhstan, Mongolia, Syria, Thailand, Pakistan, India, Brazil, Mexico, Colombia, etc. 

Product Advantages

— Ten CoreTechnologies —

1 Chain strengh preload technology 2 Pin CRV treatment technology
3 Plate smoothly punching technology 4 Bush oil hole technology
5 Vacuum Oiled Technology 6 Precision Punching Technology
7 Low frequency fatigue test technology for lange size chain  8 Chain length comparison technology
9 Variation of silence design technology 10 Chain dynamic testingtechnology technologies

Certifications

CHOHO attaches great importance to product quality and approved by many global quality system certification, such as France, Norway, and Germany. Through the establishment of a sophisticated production management process and quality control system, the entire product process control is achieved. With the introduction of advanced production, processing, and testing equipment, CHOHO has internationally leading full-process quality control capabilities to provide customers with high-quality products.

Choho Provide Chain System Solutions for The Global Top 500 and The Enterprises in Various Fields Top 10!

Broad Customer Channels  Market Continues to Develop!
CHOHO has been invited to participate in domestic & international agricultural machinery exhibitions, such as Hannover Messe, Bologna Fair, Canton Fair ,VIV ASIA and so on!

Packaging & Shipping

Packaging Details: Chain+Plastic Bag+Neutral Box+Wooden case+Big Carton+Steel Pallets or Customization

 

FAQ

1. Are you manufacturer or trade Company?
    We are a factory focused on producing and exporting Chain over 23 years,have a professional international trade team.
2. What terms of payment you usually use?
    T/T 30% deposit and 70% against document, L/C at sight.
3. What is your lead time for your goods?
    Normally 30~45 days.Stock can be shipped immediately.
4. Do you attend any Show?
    We attend Hannover show in Germany, EIMA in Italy, CZPT in France, CIAME in China and many other Agricultural machinery shows.
5.Do you offer free samples?
   Yes,we can.or you just bear the shipping cost.
6.Is OEM available?
   Yes, OEM is available. We have professional designers to help you design.
 

Type: Agricultural Machinery Chain
Material: Alloy
Inside Material: Stainless Steel
Feature: Oil-Resistant, Wear-Resistant
Tensile Strength: Strong
Made Style: Manufacture & OEM
Samples:
US$ 5/Meter
1 Meter(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

chain

Pin chain conveyor

The choice between roller chains and friction drives depends on the usage environment. Roller chains are more resistant to dirty environments and are more suitable for conveying bulk products. The pivot chain is designed to handle highly bulk products. Ideally, the center-to-center distance between the two axles should be thirty to fifty times the chain pitch. The size of the sprocket will depend on the usage environment, which will also determine the fatigue strength and resistance of the chain.

Roller chains are more resistant to dirty environments

There are some key differences between drive chains and roller chains. The most notable difference is in the materials. Drive chains are generally more durable than roller chains. However, both chains are prone to dirty environments. While solution chains are sometimes used for heavy-duty tasks, roller chains are often used in dirtier environments. In fact, drive chains are often used when the job is very dirty and the chain has to slide on the rails.
The new lubricant used on the roller chain attracts dirt and other debris to the surface of the chain and prevents lubricant from entering the load-carrying parts of the chain, such as hinge plates, bushings, and rollers. When dust is drawn into these components, lubricants, and dirt form an abrasive paste that accelerates wear.
Lube-free roller chains keep chains clean longer. This makes it easier to specify and install in areas with strict hygiene requirements. CZPT lube-free roller chains meet NSF-H1 lubrication standards. However, lubricated roller chains are still suitable for areas where food contact is unlikely.
Stainless steel roller chains are particularly resistant to acids, alkalis, and low-temperature environments. Since stainless steel is softer than carbon steel, lubricants are not as effective at preventing dirt from entering the chain. Stainless steel roller chains have a higher strength rating than standard chains, but are not as strong as chains made from carbon steel. If you are using a roller chain in a very dirty environment, you should use a stainless steel chain.

A stud chain is more efficient than a friction drive

The present invention relates to a light-duty double-ended chain that is more efficient than conventional chains. Stud chains are made by die-forging bar steel into roughly the-shaped links. This method avoids loss of shear strength due to bending and also minimizes the welded portion. The double-headed chain is light in weight and has strong resistance to fatigue damage.
This chain type has a stud-style design. Stud-shaped design provides greater tensile strength and prevents tangling. Each stud is formed by die forging and is usually shaped like an e or th. However, it is not necessary for each stud to have a uniform cross-sectional shape. Different cross-sectional shapes can be used depending on the application.
Stud chains are more efficient than friction drives because the studs in the chain are integrated. Stud links resist large breaks. Its applications are in conveyor chains and fisheries. Wear tested on boat chains made of SBC material. In the process, bolt chains were found to be more efficient than friction drives. Its applications are rapidly expanding.
Double-ended chains are more efficient for high-load applications. It features studs throughout its internal width to prevent kinking. Chains of this type are commonly used for heavy lifting machinery. Other types of chains are roller chains, power transmission chains, and bushing roller chains. These types of chains are also widely used in motorcycle, bicycle and transportation applications. In addition to being more efficient, stud chains also have fewer wear problems than friction drive chains.
A study on the difference between wear percentage and friction time showed that stud chains are more efficient than friction drives. The friction strips were measured at the beginning of the test. Take it off after 6 hours, 10080 times, and take pictures with the same diameter. As a boundary value, the diameter of the friction strip is smaller than that of a conventional chain. This shows that the present invention has better wear resistance than friction drives.
chain

Shaft chains designed for conveying bulk products

Pivot chains are versatile conveyors used in many applications. Low back type, small backrest distance, rear opening design to prevent the product from sticking to the joints and causing stiffness. Stainless steel and carbon bushing pin chains do not have pre-rotating rollers. In contrast, bucket elevators do not use pivot chains.
CZPT pin chains provide unmatched performance in agricultural and industrial machinery. They are constructed from a single cast barrel and are connected by hardened steel pins. CZPT’s steel pivot chains are strong enough to withstand the corrosive environments of agricultural and industrial applications. The steel pins in the CZPT Pintle Chain are hardened and riveted to ensure long-term durability and optimum performance.
Lifeguard chains feature patented interlocking side links that reduce gaps between adjacent side panels. They can withstand a variety of applications and will never break under pressure. These chains are available in 1/2” and 1” pitch configurations. CZPT combines both types of pin chains to achieve the best of both worlds. CZPT features dual pin chains and pin joints to increase chain durability and reduce maintenance hassles.
CZPT’s engineering team can custom design pivot chains for your specific application. Designed for specific speed, friction, temperature and wear requirements, these chains are ideal for a variety of applications. Headquartered in Milwaukee, Wisconsin, the company operates on two strategic platforms: Food and Beverage and Industrial Applications. The products of these companies are used in food, energy and manufacturing.

China OEM Alloy Steel Conveyor Chain High Strength Agricultural Machinery Baling Machine Chains   sintered bush chainChina OEM Alloy Steel Conveyor Chain High Strength Agricultural Machinery Baling Machine Chains   sintered bush chain
editor by CX 2023-06-13

China Good quality marine hardware motorcycle parts Conveyor Chain Roller Chains /Hollow Chains/stainless steel Pintle Chain (M Series) bush conveyor chain

Product Description

Conveyor Chains (M Series)
Chain No.: M20, M28, M40, M56, M80, M112, M160, M224, M315, M450
Pitch: 40.0mm to 200.0 mm
For Free Samples
Prompt Delivery
Green Product
International Approvals
Experienced Staff

Why choose us?
1. HangZhou Xihu (West Lake) Dis.hua Chain Group Co., Ltd established in 1991, we have 5 subsidiaries in China and also have 6 subsidiaries abroad;
2. We covering a production area of 200, 100 square meters, have more than 1, 800 sets of advanced equipment and over 3, 100 highly skilled employees, the annual production capacity has exceeded 20, 000, 000 meters;
3. We specialized in producing all kinds of standard chains and special chains, such as A or B series chains, driving chains, conveyor chains, dragging chains, agricultural chains and so on;
4. We have obtained ISO9001, ISO14001, ISO16969, AAA and API certificates.

The company is specialized in producing all kinds of standard chains and special chains, E. G. A or B series chains, automobile chains, stainless steel chains, combine harvester chains, heavy-duty cranked link transmission chains, stereo garage chains and maintenance-free chains etc.

In recent years, it invests the capital and depends on the improvement of technology to accelerate the step of new product development and the step of technology reform. It intends to produce high strength and precision chains in order to meet requirements of the domestic and overseas markets. We have enclosed our catalog, which introduces our company in detail and covers the main products we supply at present. You may also visit our online company introduction which includes our latest product line.

Should any of these items be of interest to you, please let us know. We will be happy to give you a quotation CZPT receipt of your detailed requirements.

We look CZPT to receiving your enquires soon.

 

Usage: Transmission Chain
Material: Stainless steel
Surface Treatment: Polishing
Feature: Heat Resistant
Chain Size: 1/2"*11/128"
Structure: Roller Chain
Customization:
Available

|

Customized Request

chain

buy drive chain

Buying a drive chain requires a certain understading of its characteristics. This article discusses the different types of chains available, including Silent, Flat-top, and Duplex. By the end of this article, you should have a basic understanding of what each type of chain is for. First, here are some basic rules to keep in mind when shopping for a chain. To find the drive chain that best suits your needs, read on.

roller chain

Choosing the right roller chain for your drive chain depends on several factors. First, you have to determine the motor horsepower and rpm for the small drive sprocket. These values ​​determine the size of the chain and the number of teeth on the drive sprocket. Next, you need to determine the size of the conveyor chain, it can be the horizontal, vertical, or curved radius. Depending on your specific needs, you can also choose between two-strand or three-strand chains.
The roller chain of the drive chain must be properly tensioned. It should also have a proper lubrication system. Chain sag should not exceed two to four percent of the center distance (the distance between the two axles). Also, it shouldn’t make any unusual noises or obvious problems. One of the main reasons for excessive wear is the size of the load. Each chain has a specified maximum working load.
The maximum roller chain load must be less than 1/9 or 6 times the tensile strength of the drive chain. This amount should not exceed this threshold, as exceeding this level will result in chain plate fatigue. To avoid this, you should use a roller chain with a higher number of strands. Also, for high power requirements, a roller chain with a higher number of strands is recommended. One final tip for choosing a drive chain: it should not be used when there is a high risk of corrosion or rusting.
The materials used to manufacture roller chains vary according to the specific application. Common materials include steel and stainless steel. However, stainless steel is used in food processing machinery and other environments that require lubrication. Brass and nylon are also sometimes used. These factors determine the selection of suitable materials for the drive chain. If you are not sure which material to use, you can consult an industry professional. These professionals will help you choose the right chain for the job at hand.

mute chain

The design of the silent transmission chain is as follows: the large chain plates 2 are stacked one on top of the other in the direction of the chain length. The connecting rods are connected by connecting pins 3. The outermost and central guide plates 4 are fastened to the connecting pins 3 by means of rivets. This construction helps minimize friction on the sliding surfaces of the chain. Chainplate 2 of the silent transmission chain is usually made of stainless steel.
The link plates are made of steel and have a rectangular shape with pinholes 41. These guide plates have no teeth but have curved surfaces that guide the silent drive chain on the sprockets. In addition, the rear portion of the guide plate is higher than the portion of the chainplate. This feature improves pitch balance. The present invention is also applicable to silent transmission chains using rockers.
When it comes to chain design, it’s important to remember that silent drive chains are often used in automotive engines, especially timing and cam drives. This type of drive reduces noise and vibration due to its low engagement angle and links engagement with the sprocket. However, these applications are not limited to timing and cam drives; they can also be used for front-wheel power transmission. For example, silent drive chains are designed to resemble those used in NASCAR racing engines.
The design of the silent drive chain is based on the structure of the roller chain. Its components are standardized and manufactured according to pitch. There are single-row and multi-row versions. Quiet chains, also known as inverted tooth chains, are shaped to reduce noise from stretching. It’s also designed to minimize the amount of friction caused by small changes in pitch. Its teeth don’t slide against each other, so the chain is smoother and more durable.

flat top chain

One of the important parts of the flat top chainplate system is the hinge pin, which is used to fix the chainplate and is responsible for the smooth and efficient conveying of the chainplate. There are several types of hinge pins, including single hinge pins and double hinge pins. The single hinge pin is suitable for the chainplate with a small span and small bearing capacity, and the double hinge pin is suitable for the chainplate with a large span and high bearing capacity.
The side bending flat top chain is suitable for conveying large and medium workpiece pallets. They can be made of steel or plastic, each with its own advantages. Both chainplates are designed to convey material smoothly. Side curved flat-top chains can be used on straight conveyors. They have a low coefficient of friction and can transport weights up to 1.2 kg/cm. They can also be combined with HD profiles.
Flat top drive chains are usually made of plastic material and come in two types: tabletop chains and buffer chains. They come in a variety of widths, but the most popular are standard widths, ranging from 3.25 inches to 12 inches. MatTop chains are usually shipped in 10-foot lengths. They come in different styles, but they all have the same basic specs. Tabletop chains are designed for general conveying, while pad chains are used for specific applications. Solid top chains are suitable for conveying bulk materials, while wide pad chains can handle large volumes of fluids and/or solid-solid mixtures.
These chain conveyors can be used to convey, connect or lift small items. This type of chain is especially useful in industries where the product is hot or greasy. The modular design of these chains allows them to be configured in three dimensions, making them suitable for production changes and transitions. They also help reduce slack in the chain. Flat top chains are commonly used in final assembly and mechanical or paint restoration in the automotive industry.

double chain

Besides the roller chain, another type of chain drive is the double drive chain. This type of chain consists of a series of short cylindrical rollers connected together by side links and driven by gears called sprockets. This type of chain is very reliable and only requires a tractor with a high rpm PTO. It is manufactured by CZPT and is available in many different sizes and finishes.

Self-lubricating chain

Self-lubricating drive chains are the ideal solution for applications that do not require the relubrication of conventional chains. This maintenance-free roller chain features fully heat-treated components that increase the chain’s fatigue resistance and strength. It’s sintered alloy bushings are oil-impregnated, reducing the chance of premature wear and elongation. Its self-lubricating properties enhance its durability and work well even in hard-to-reach places.
CZPT self-lubricating roller chains feature preloaded sintered steel bearing pins and oil-impregnated sintered bushings. These chains are drop-in replacements for standard roller chains and run on the same sprockets as standard chains. In addition to being maintenance-free, self-lubricating roller chains are compatible with most existing sprockets and are ideal for demanding applications.
The O-ring chain concept was used to develop self-lubricating systems. It has two or more annular grease storage chambers. A self-lubricating bushing roller chain has an oil reservoir between its pin chain and the roller chainplate. A grease seal between these two plates isolates the moving parts and keeps the joints well lubricated. O-rings are made of special nitrile rubber, whose properties vary by application.
CZPT SLR conveyor chains and CZPT SLR drive chains have rollers on sintered bushings. CZPT SLR chains and SLR conveyor chains are self-lubricating and have a higher working load than standard ANSI chains. They may not be interchangeable with other self-lubricating chains from other manufacturers. Self-lubricating drive chains are the best solution for demanding industrial applications requiring heavy-duty, reliable conveying.

China Good quality marine hardware motorcycle parts Conveyor Chain Roller Chains /Hollow Chains/stainless steel Pintle Chain (M Series)   bush conveyor chainChina Good quality marine hardware motorcycle parts Conveyor Chain Roller Chains /Hollow Chains/stainless steel Pintle Chain (M Series)   bush conveyor chain
editor by CX 2023-05-15

China Coated Heavy Steel Detachable Conveyor Roller Chains for Agricultural Industry ca550 roller chain

Product Description

Engnieering chain and Conveyor Roller chain

  • Roller chain elements are shot peened for better tiredness resistance
  • Heat handled components for enhanced sturdiness, longevity and dress in resistance
  • Chain is pre-loaded (Pre-stretched) to remove original stretching.
  • Chain factors are lubricated ahead of assembly, then dipped in a hot oil bath following assembly for highest coverage between the chain factors.

The engineering chain and conveyor chains outlined on this website page are produced by Xihu (West Lake) Dis.wu, a morden conveyor chain manufacturer primarily based in China, these merchandise are especially made for automatic logistics products , content dealing with tools, engineering cars, and far more.  We make chains in accordance to your custom-made requirements.
 

Chain Type  Welded chain,                      Roller chain,                         
Hollow pin chain ,               Drawbench chain,                   
Leaf chain,                         Engineering chain,               
Paver chain,                       Bucket elevator chain,       
Skid chain,                         Sugar mill chain,                    
Double flex chain,              Sharp top chain,                  
 Forged chain,                   Cast chain ,                  
FV/FVC/FVT series chain,    Scraper chain                      
M/MVT/MC serise chain,                                        
Z/ZC serise chain,                                            
stainless metal chain ,               
Sprocket
Materials  carbon metal or Alloy with heat treatment /stainless steel                                                                                               (via harden/case  harden/induction harden)
Area Shot Peening                                                                            Zinc-plated                       
Dacromet                           Blacking                                                     
Lubricating ,free of rust
Top quality inspection Inspect length precision and Hardness,                                    
Pre-stretching after assembling,
Deal Polybag+plywood circumstance
Application Sugar mill,cement mil,l metallurgy sector,              car business,grain device.mining machine  and so on

Why Select DCC? 

one. HangZhou Xihu (West Lake) Dis.wu chain transmission manufacturing co.,Ltd is a professional manufacture of chains,and is the member unit of China Countrywide technological committee for standardization for china transmission,

2. We occupied an area in excess of a hundred thousand sqm,owned common workshops more than 30 countless numbers sqm and above 300sets of professional equipments to generate chains in large-scale as effectively as full inspection and check units.

3. We handed by means of the authentications of ISO9001:2000 international good quality system and ISO14001 environmental management system .

four. We have seventy five% of items which are exported to Europe,The us,Japan , Southeast Asia ,and so on,

5. Much more than 10years manufacturing facility experience  ,Practically all the components are developed by our very own manufacturing facility,therefor we can handle the cost and good quality.

 

US $6-60
/ Meter
|
5 Meters

(Min. Order)

###

Material: Iron
Structure: Tooth Chain
Surface Treatment: Polishing
Chain Size: Available on Request
Feature: Fire Resistant, Oil Resistant, Heat Resistant
Warranty: 1-2 Years

###

Customization:

###

Chain Type  Welded chain,                      Roller chain,                         
Hollow pin chain ,               Drawbench chain,                   
Leaf chain,                         Engineering chain,               
Paver chain,                       Bucket elevator chain,       
Skid chain,                         Sugar mill chain,                    
Double flex chain,              Sharp top chain,                  
 Forged chain,                   Cast chain ,                  
FV/FVC/FVT series chain,    
Scraper chain 
                    
M/MVT/MC serise chain,                                        
Z/ZC serise chain,                                            
stainless steel chain ,               
Sprocket
Material  carbon steel or Alloy with heat treatment /stainless steel                                                                                               (through harden/case  harden/induction harden)
Surface Shot Peening                                                                            Zinc-plated                       
Dacromet                           Blacking                                                     
Lubricating ,free of rust
Quality inspection Inspect length precision and Hardness,                                    
Pre-stretching after assembling,
Package Polybag+plywood case
Application Sugar mill,cement mil,l metallurgy industry,              automobile industry,grain machine.mining machine  and so on
US $6-60
/ Meter
|
5 Meters

(Min. Order)

###

Material: Iron
Structure: Tooth Chain
Surface Treatment: Polishing
Chain Size: Available on Request
Feature: Fire Resistant, Oil Resistant, Heat Resistant
Warranty: 1-2 Years

###

Customization:

###

Chain Type  Welded chain,                      Roller chain,                         
Hollow pin chain ,               Drawbench chain,                   
Leaf chain,                         Engineering chain,               
Paver chain,                       Bucket elevator chain,       
Skid chain,                         Sugar mill chain,                    
Double flex chain,              Sharp top chain,                  
 Forged chain,                   Cast chain ,                  
FV/FVC/FVT series chain,    
Scraper chain 
                    
M/MVT/MC serise chain,                                        
Z/ZC serise chain,                                            
stainless steel chain ,               
Sprocket
Material  carbon steel or Alloy with heat treatment /stainless steel                                                                                               (through harden/case  harden/induction harden)
Surface Shot Peening                                                                            Zinc-plated                       
Dacromet                           Blacking                                                     
Lubricating ,free of rust
Quality inspection Inspect length precision and Hardness,                                    
Pre-stretching after assembling,
Package Polybag+plywood case
Application Sugar mill,cement mil,l metallurgy industry,              automobile industry,grain machine.mining machine  and so on

Choosing a drive chain for a belt conveyor

The drive chain is used to move heavy objects on the conveyor chain. Chains are magnetic, antistatic, high temperature, or chemical resistant, depending on the application. These types of drive chains are used in many different industries. A common machine that uses this type of drive is a chain hoist. Chain hoists are designed to lift heavy loads with minimal effort. Chains are often used to transport heavy loads.

roller chain

Whether using a roller chain as a drive chain or a belt conveyor can be tricky. Whether it’s a small low-speed drive with manual lubrication or a high-speed pump-lubricated drive with multiple sprockets, there are several factors to consider when choosing a roller chain. First, you need to consider motor horsepower and rpm. The speed of the motor determines how much chain you need. For example, if you are using a low-speed drive, you will need to choose a low-pitch, high-pitch chain. Another thing to consider is chain length – ideally, you can go for an even number of sprockets and chains, but never go smaller.
The lubrication system is also important because the lubrication system must be able to deliver enough oil. The type of oil used to lubricate a chain depends on its operating environment, temperature and speed. Wear is caused by pressure on the bearing, angular sliding of the pins, and rotation of the rollers. There are five different types of lubrication methods available, depending on the system used. A high-quality carbon steel chain is a major advantage when operating at high temperatures, as it can withstand higher temperatures.
The materials of construction for roller chains vary by application. Typically, the most common materials are steel and stainless steel, but sometimes alloy steels are used in food processing machinery that may have lubrication problems. Nylon and brass are also sometimes used. Some industries require heavy-duty chains. If you need an extremely heavy chain, you may want to consider a heavy-duty roller chain. If you are not sure which type of chain is best for your application, consult an industry expert.
Unlike other chains, roller chains are more efficient from a size and weight perspective. While solution chains are useful in some situations, drive chains are more effective for dirty work and slipping on tracks. They are commonly used in construction and manufacturing. There are other advantages to using a drive chain. They are generally stronger than belts, which is a huge benefit. So, if you’re wondering which is better, here are them:
chain

Multi-strand roller chain

The multi-strand roller chains for drive chains market is expected to grow at a CAGR of over 20% during the forecast period. Market reports cover product demand, supply, and cost. The report covers the global market including company profiles, product details, and contact information of key players. It also takes into account the revenue generated by different application areas. The report contains 159 pages of useful information and data. It is an essential tool for anyone involved in drive chain manufacturing.
The essential characteristics of multi-strand chains are their power ratings and allowable bearing area pressures. Power rating is an important characteristic that determines the chain’s ability to transmit a specific load. Typically, multi-strand chains are rated in the range of 12,000 watts per strand. However, their capabilities are limited by link plate fatigue, roller impact fatigue, and wear between pins and bushings.
Energy Series chains are ideal for high-speed and high shock load applications. The chain is designed to provide reliable power and withstand the rigors of the oil and gas industry. It uses high-strength steel and double-coated rolls. These chains come in different lengths and come in two types: single-strand and multi-strand. It is best to consult a professional to find out which chain best suits your needs.
The global multi-strand roller chains market is expected to grow at a CAGR of over 7% during the forecast period. From 2011 to 2019, the industry is expected to grow by nearly 6%. However, the outlook for this market is not optimistic, with some companies experiencing negative growth over the past year. Nonetheless, slowing global economic growth and tightening COVID-19 regulations are likely to hinder the market growth.
Although requirements vary by application, it must be remembered that the load on a multi-strand roller chain must not be greater than 1/9 or 1/6 of the tensile strength of the chain. If the load exceeds this threshold, the chainplates will fatigue. This is the main reason why roller chains are expensive. However, this is not always the case. Multi-strand roller chains are a great idea if you are looking for an affordable and reliable drive chain.

double chain

If you’re looking for an industrial-grade drive chain, you’ve probably considered a double chain. The chain meshes with the sprockets on either side of the gears. It comes in different styles, each with its own advantages and disadvantages. The CZPT duplex series has twice the power capacity of standard SC duplex chains. This type of chain is usually best for new applications. On the other hand, SC double chain chains are the cheapest but have less weight and power capacity.
Another option is a triple drive chain. This type of drive chain has an additional row of plates and contains three sprockets. Its unique design reduces the weight and impact velocity of the timing chain. It is usually used in automotive applications. It is ideal for low to medium-load timing applications. It is also available in acoustically optimized versions. Three-quarter inch pitch double chain chains are widely used in gasoline engine aids and timing drives.
chain

flat top chain

High friction rubber is usually installed on the top or bottom of a flat top drive chain to improve its high friction surface and prevent interference during side bend conveying. The chain plate can be customized with thin rubber layer or thick elastic polyurethane rubber according to customer requirements. In addition to providing high friction, the flat top chain also provides excellent anti-slip properties for glass bottles.
Premium steel flat top chain with high quality surface finish and excellent wear resistance. They have a high level of noise reduction and can be used in heavy duty conveying applications. These chains are available in a variety of alloys such as stainless steel or aluminum. Some models are designed to be very rugged and last longer. Aluminum and galvanized steel chains are popular choices for these chains.
Flat Top Drive Chain Conveyors are versatile and come in an endless combination of configurations. Drives can be connected end-to-end to form long conveyor lines, while side-curved flat-top chains are versatile enough to handle tandem, serpentine or carousel configurations. Standard and heavy duty models are also available. Flat top chains can be used in many different applications including food, beverages and other commodities.
Standard flat top chains are usually rectangular or L-shaped and designed for use on straight conveyors. In some cases, space constraints may require a U-shaped or rectangular conveyor line. For smoother conveying, side-curved flat-top chains can be used. These chains are paired with regular rectangular chain plates and tall pins for high load capacity. They come in different widths, including multi-strand chains.

China Coated Heavy Steel Detachable Conveyor Roller Chains for Agricultural Industry     ca550 roller chainChina Coated Heavy Steel Detachable Conveyor Roller Chains for Agricultural Industry     ca550 roller chain
editor by czh 2023-01-09